top of page

1962 Ferrari 250 GTE 2+2 Series II by Pininfarina

 
240 bhp, 2,953 cc SOHC Colombo V-12 engine with twin-choke Weber 36DCS carburettors, four-speed gearbox with overdrive, independent front suspension, live rear axle with leaf springs and coil springs, and four-wheel hydraulic disc brakes. Wheelbase: 2,600 mm

   The 250 GTE 2+2 was not officially launched until the Paris Motor Show of October 1960, but this was not its public debut, as several months prior, it served as the course marshal’s car at Le Mans. It was appropriate, as even though it was never designed as a racing car, much of the 250 GTE’s roots were clearly seeded in competition.
    Although several special-order 2+2s had been produced in the 1950s, this was Ferrari’s first true production 2+2. At this time, Ferrari was keen to increase its potential market and wanted to compete with Aston Martin and Maserati. The new 2+2 would bring, for the first time, wide-scale production, with 953 examples in total, across three model variants, being produced between 1960 and 1963. For Ferrari, this car was a game-changer: a manufacturer of racing and sports cars was now adding a comfortable four-seat “family” car to its line-up.
    Ferrari used the same chassis as the legendary 250 GT LWB Tour de France, but the engine was moved eight inches forward. Both the front and rear track were also increased, and the rear section of the roof was raised, providing more cabin space to accommodate the rear seats whilst still maintaining the same wheelbase. With the ability to fit four passengers comfortably, Ferrari had succeeded in increasing its market significantly, and the 250 GTE 2+2 became the company’s top-selling model of the time. 
   The 250 GTE 2+2 offered here, the 223rd Series II produced, left the factory in May 1962 and was delivered to Pininfarina’s Turin shop for a body to be fitted. In late 1962, the car was sold through renowned distributor Franco-Brittanic Autos Ltd. to the original owner, Mr. Cincani, a resident of Paris. It would remain on Parisian roads for the next 13 years, before being exported to Newport Beach, California, where it was sold to Robert and Pennie Sleeper. In 1979, it next passed to Marc W. Charronat, a student living in Walnut Creek, California. The car then returned to Europe by collector Mr Jens Dinesen, of Denmark, and for some time, it was one of only three GTEs in the country.

1959 BMW 507 Roadster

 
150-155 bhp (DIN rating), 168 cc all-alloy OHV V-8 engine, dual carburetors, four-speed manual gearbox, independent front suspension with dual A-arms and torsion bars, live rear axle with torsion bars, and hydraulic front disc, rear drum brakes. Wheelbase: 97.6"

   The BMW 507 was a brief but brilliant reinstatement of BMW’s sporting heritage that had flourished with the successful BMW 328 prior to World War II. Launched in 1955, the 507 was envisioned by American BMW importer Max Hoffman to fill the divide between the Mercedes-Benz 300SL and the far less expensive and powerful offerings from MG and Triumph. Mechanical components were largely sourced from the 502 and 503 series, with engineering led by Fritz Fiedler. Since Hoffman was dissatisfied with preliminary body designs, he eventually had Count Albrecht Goertz, who had the earlier 503 already to his credit, pen the sensuous lines of the 507.
    As with all its cars, the 507 was a tangible expression of the characteristic BMW excellence in performance, construction and design. At once an elegant masterpiece and a downright gorgeous design with sensuous curves, the 507 was powered by the 3.2-liter overhead-valve aluminum block V-8 engine that was shared with the 502 and 503 series but developed a rated 150 bhp with twin carburetors. 
   Hoffman initially targeted a $5,000 price point for the 507, but BMW, which essentially hand-built each car, could not reach profitable production levels. The 507’s initial $9,000 price quickly escalated to over $11,000. Despite the increase, BMW reportedly lost money on each one. Production began in November 1956 following an unveiling at the 1955 Frankfurt Motor Show and ended two-and-a-half years later with only 251 examples built, not counting a completely different prototype and two “one-off” examples. 
   However, the lofty price of the 507 did not deter the elite target market envisioned for the 507, including iconic entertainer Elvis Presley. Eventual Grand Prix world champion John Surtees was given a 507 by Count Agusta as a reward for winning the 1956 500cc World Motorcycle Championship with an MV Agusta motorcycle. 
   The design was slightly revised in 1957 with the appearance of the Series II models. Differences included increased engine output and a little additional space behind the seats to give taller drivers a more comfortable driving position. While many 507 Roadsters were purchased by their original owners purely on the basis of their stunning aesthetics and sporting open bodywork, the cars were sophisticated performers in the finest BMW tradition. A number of final-drive ratios were available with the 507, ranging from 3.70:1 to 4.20:1 depending upon the customer order, with top speeds for the 507 ranging from 124 to 136 mph. Acceleration from rest to 60 mph was equally impressive at 8.8 seconds, and while not intended for the drag strip, the 507 covered the quarter-mile in just 16.5 seconds. 

2002 Dodge Viper GTS Final Edition

 
400 bhp, 488 cu. in. overhead-valve V10 engine with fuel injection, Borg-Warner six-speed manual transmission, four-wheel independent suspension with unequal-length upper and lower control arms, coil-over shock absorbers and anti-roll bars, rear toe link, and ventilated four-wheel hydraulic disc brakes. Wheelbase: 96.2"

   With its muscular roadster body, raucous side-mounted exhaust pipes and insanely powerful V10 engine, the Dodge Viper recalled the purity and purpose of the original Shelby Cobra of the 1960s. Its sheer excitement and stylistic excess made the utilitarian K-Car a distant memory and resurrected the once-proud Chrysler performance heritage. 
   While the Viper’s basic concept was drawn from the Izod show car of 1985, development gathered steam in early 1988 during a casual meeting between Chrysler president Bob Lutz and design Chief Tom Gale. They envisioned a simple, high-performance “image car,” an idea that was also supported by Carroll Shelby, who was acting as a consultant for Chrysler at the time. 
   The resulting Viper made its debut at the 1989 North American International Auto Show in Detroit and was an immediate hit, drawing unsolicited order requests and deposit money on the spot. With its incredible 400-horsepower V10 engine, stunning performance potential and race-inspired handling, the Viper legend was born, and its basic essence continues today. 
   The first-series 1993 Viper RT/10 Roadster offered here is an original example that joined a highly respected private automobile collection in early 2007. It shows just 6,338 miles today, and desirable features include a removable hard top, glass side curtains and an AM/FM cassette stereo unit, in addition to such standard Viper features as a six-speed transmission, four-wheel disc brakes and side exhaust outlets.

 

- From an important private collection
- A very desirable first-series example
- Just 6,338 miles from new
- Stunning styling and performance

3

© 2014  by EUGENCLASSIC . Proudly created with Wix.com

bottom of page